‘FILLER‘ LIGHT FILLER MATERIAL

FILLER ; It is a new generation composite LIGHTWEIGHT FILLING MATERIAL with perlite-based natural granular mineral content, polymer additives that are harmless to humans and nature, with HIGH PRESSURE RESISTANCE, FIRE RESISTANCE, INCREASED DENSITY.

PRODUCT FAMILY: PLASTER

APPLICATION AREA: BACKFILLING OF CANALIZATION, UNDERGROUND PIPES, CANALS AND TUNNELS

USAGE SURFACE: AERATED CONCRETE, BIMS BLOCK, BRICK, EXPOSED CONCRETE, SHEET METAL

APPLICATION TECHNIQUE: MACHINE

PRODUCT SPESIFICATIONS
Package Rope

 BIGBAG
Reactione to Fire*

800 ℃ - A1 (BEST FLAMMABILTY VALUE)

Bond Strength*

0,36 N/mm2- FP:B
Capillary Water Absorption* W0
Pressure Resistance* 2,5 N/mm2 - CSII
Water Vapor Permeability* 15 kg/m2.s. Pa µ≤15 kg/m2.s. Pa
Thermal Conductivity* 0,20±5 W/m2.K - T2 CLASS
Dry Unit Density* 1100 ±50 kg/m3
Sound Absorption* 2-3 db/1cm
Method of Application Machine
Consumption* 1 m3 = 1 tonne
Shelf-Life 12-18 Months (in dry environment)
Setting Time* First Setting Between 6.5-8 Hours Last Setting Between 12-18 Hours
Shrinkage Does not Shrink in Drying or Humid Environments
Workability Between 6-8 Hours
Greenhouse Gas Effect CO₂ Carbon Emissions are Zero
  *Technical specifications are for information purposes. Cannot be used instead of official documents.

ADVANTAGES

  • RESISTANT TO ATMOSPHERIC CONDITIONS
  • BREATHABLE, DOES NOT FORM BACTERIA, PROTECTS FROM MOISTURE
  • PROVIDES HEALTHY LIVING BY PREVENTING MOISTURE AND MOLD FORMATION
  • A1 CLASS FIREPROOF PRODUCT, RESISTANT UP TO 800 ℃
  • T2 ENERGY CLASS
  • IT IS A LIGHTWEIGHT MATERIAL WITH LOW DENSITY
  • HAS THE ABILITY TO REDUCE RADIATION IN THE ENVIRONMENT
  • EASY TO APPLY, REPAIRABLE
  • NO GREENHOUSE GAS EMISSION ENVIRONMENTALLY FRIENDLY
  • CARCINOGEN FREE, NOT PETROCHEMICAL PRODUCT
  • SHORT LABOR AND TERMINATION TIMES, SHORTENS THE CONSTRUCTION PERIOD OF THE BUILDING, SAVES MATERIAL AND LABOR COSTS
  • SIMILAR TO SCREED APPLICATIONS, EASY TO APPLY
  • NO DOWEL REQUIRED, PREVENTS PUNCTURING OF THE STRUCTURE AND LOSS OF STRENGTH
  • SUSTAINABLE AND ECOLOGICAL MATERIAL, ENERGY FRIENDLY

WARNINGS-PRECAUTIONS

  • Depending on the type of machine, the volume loss may vary depending on the breakage and crushing of the material by the machine.
  • Protect from direct sunlight during storage, transportation and application.
  • Product packages should not be exposed to point load effects during transportation and storage.
  • IZOROYAL PRODUCTS SHOULD NOT BE EXPOSED TO LONG-TERM EXPOSURE TO ATMOSPHERIC CIRCUMSTANCES AFTER APPLICATION OF THE PRODUCT AND SHOULD BE COATED WITH FINAL COATING PRODUCTS (PRIMER-WATER BASED PAINT-DECORATIVE PLASTER- EXTERIORATIVE PLASTER- FACADE COATINGS- FLOOR COATINGS, etc.).
  • 1 BAG SHOULD BE USED AT ONE TIME.
  • Shelf life is 18 months and should be stored in dry, suitable ambient conditions.
  • Safety precautions should be taken during application and manufacturer's instructions should be followed.
  • PREPARATION STAGES OF PRODUCTS ACCORDING TO THE SURFACE TO WHICH THE PRODUCTS ARE APPLICED AND THE CONSTRUCTION TECHNIQUE SHOULD BE CONSIDERED according to the application manual.
  • Waste account should be kept separately. It varies according to construction site conditions.
  • Do not exceed the recommended amount of water. The material should not be used below the minimum temperature allowed for complete setting. Low temperatures may slow setting while high temperatures may accelerate it. The workability time varies depending on the temperature.
  • The newly applied product must be protected against freezing.
  • If all conditions are met, Product Quality is guaranteed with IZOROYAL assurance (20 years).

APPLICATION FIELDS

FILLER

APPLICATION STRUCTURES

TRANSPORTATION
INFRASTRUCTURE

PROJECT SAMPLES