'AQUA' HYDROPHOBIC THERMAL INSULATION PLASTER

‘AQUA‘ HIGH HYDROPHOBIC THERMAL INSULATION PLASTER

AQUA is a new generation composite HIGH HYDROPHOBIC THERMAL INSULATION PLASTER with perlite-based natural granular mineral content, harmless to human and nature, polymer additives, HYDROPHOBIC capability INCREASED , FIRE RESISTANT, SOUND ABSORBING, LIGHTWEIGHT.

PRODUCT FAMILY: PLASTER

APPLICATION AREA: WET AREAS (BATHROOM, KITCHEN, BALCONY), POOL, WATER TANK, ROOF-GREEN ROOF-TERRACE, FOUNDATION, BASEMENT, UNDERGROUND GARAGE AND WAREHOUSE, ELEVATOR SHAFT / FLOOR-WALL, SHEAR WALL, PARAPET WALL

USAGE SURFACE: AERATED CONCRETE, BIMS BLOCK, BRICK, EXPOSED CONCRETE, DRYWALL, BOARDEX, SHEET METAL, WOODEN (OSB, RAW MDF)

APPLICATION TECHNIQUE: MACHINE, BY HAND

SPESIFICATIONS

PRODUCT SPESIFICATIONS
Package Rope	7kg ±1kg Craft
Reactione to Fire*	800 ℃ - A1 (BEST FLAMMABILTY VALUE)
Bond Strength*	0,13 N/mm²- FP:B
Capillary Water Absorption*	0,40 kg/(m².min^0,5) - W1
Pressure Resistance*	0,56 N/mm² - CSI
Water Vapor Permeability*	4,36 kg/m².s. Pa µ≤15 kg/m².s. Pa
Thermal Conductivity*	0,048±5 W/m².K - T1 CLASS
Dry Unit Density*	220 ±50 kg/m³
Sound Absorption*	8-10 db/1cm
Method of Application	Machine or By Hand
Consumption*	3 m²/cm
Shelf-Life	12-18 Months (in dry environment)
Setting Time*	First Setting Between 6.5-8 Hours Last Setting Between 12-18 Hours
Shrinkage	Does not Shrink in Drying or Humid Environments
Workability	Between 6-8 Hours
Greenhouse Gas Effect	CO₂ Carbon Emissions are Zero

*Technical specifications are for information purposes. Cannot be used instead of official documents.

ADVANTAGES

ADVANTAGES

PROVIDES THERMAL INSULATION, DOES NOT FORM A THERMAL BRIDGE
HIGLY WATER REPELLENT-HYDROPHOBIC, RESISTANT TO ATMOSPHERIC CONDITIONS
UP TO 3 mm GAP DOES NOT ALLOW WATER TRANSMISSION.
BREATHABLE, DOES NOT FORM BACTERIA, PROTECTS FROM MOISTURE
PROVIDES HEALTHY LIVING BY PREVENTING MOISTURE AND MOLD FORMATION
A1 CLASS FIREPROOF PRODUCT, RESISTANT UP TO 800 ℃
T1 ENERGY CLASS
IT IS A LIGHTWEIGHT MATERIAL WITH LOW DENSITY, IT IS AN IMPORTANT FACTOR IN EARTHQUAKE-RESISTANT BUILDINGS BY NOT IMPOSING A LOAD ON THE BUILDING
ACOUSTIC PROPERTIES, ABSORBS SOUND
HAS THE ABILITY TO REDUCE RADIATION IN THE ENVIRONMENT
EASY TO APPLY, REPAIRABLE
NO GREENHOUSE GAS EMISSION ENVIRONMENTALLY FRIENDLY
CARCINOGEN FREE, NOT PETROCHEMICAL PRODUCT
IN FACADE APPLICATIONS, IT CAN BE APPLIED WITHOUT APPLYING ROUGH OR THIN PLASTER TO THE SURFACES.
SHORT LABOR AND TERMINATION TIMES, SHORTENS THE CONSTRUCTION PERIOD OF THE BUILDING, SAVES MATERIAL AND LABOR COSTS
SIMILAR TO PLASTER AND SCREED APPLICATIONS, EASY TO APPLY
NO DOWEL REQUIRED, PREVENTS PUNCTURING OF THE STRUCTURE AND LOSS OF STRENGTH
SUSTAINABLE AND ECOLOGICAL MATERIAL, ENERGY FRIENDLY
REDUCES CARBON EMISSIONS BY LOWERING ENERGY CONSUMPTION
UP TO 50% SAVINGS IN HEATING AND COOLING COSTS
PROVIDES COMFORTABLE LIVING SPACE WITH 4-SEASON PROTECTION

T.R. MINISTRY OF ENVIRONMENT, URBANIZATION AND CLIMATE CHANGE

POZ NO: 04.484

T1 ENERGY CLASS

BEP-TR ID NO- L:0.061

0,048 λ

OUR PRODUCTS ARE MANUFACTURED IN ACCORDANCE WITH TS-EN 998-1 STANDARD AND ARE IN T1 ENERGY CLASS. IN CALCULATIONS ACCORDING TO TS-825 STANDARD, IZOROYAL PRODUCTS ARE INCLUDED IN BEP-TR AND ENERGY IDENTITY CERTIFICATE IS OBTAINED.

WARNINGS-PRECAUTIONS

AQUA: WATER REPELLENCE (HYDROPHOBIC) FEATURE HAS BEEN SPECIFICALLY DEVELOPED AND INCREASED FOR SURFACES WITH STANDING WATER AND EXPOSED TO DENSE VERTICAL WATER.

AQUA' UP TO 3mm OPENING DOES NOT ALLOW WATER TRANSMISSION,

PREVENTS CORROSION.

WARNINGS-PRECAUTIONS

Volume loss may occur due to breakage and crushing of the material by the machine. It may vary according to each machine type.
Protect from direct sunlight during storage, transportation and application.
Product packages should not be exposed to point load effects during transportation and storage.
IZOROYAL PRODUCTS SHOULD NOT BE EXPOSED TO LONG-TERM EXPOSURE TO ATMOSPHERIC CIRCUMSTANCES AFTER APPLICATION OF THE PRODUCT AND SHOULD BE COATED WITH FINAL COATING PRODUCTS (PRIMER-WATER BASED PAINT-DECORATIVE PLASTER- EXTERIORATIVE PLASTER- FACADE COATINGS- FLOOR COATINGS, etc.).
1 BAG SHOULD BE USED AT ONE TIME.
Shelf life is 18 months and should be stored in dry, suitable ambient conditions.
Safety precautions should be taken during application and manufacturer's instructions should be followed.
PREPARATION STAGES OF PRODUCTS ACCORDING TO THE SURFACE TO WHICH THE PRODUCTS ARE APPLICED AND THE CONSTRUCTION TECHNIQUE SHOULD BE CONSIDERED according to the application manual.
It can be applied 3 cm thick at a time in plaster application on vertical surfaces. For more than 3 cm thickness applications, gradual application is recommended.
In plaster applications on vertical sections, the m2 surface covered by the product is calculated by assuming that the surface to be used is flat.
Product thickness calculation should be made according to the regions. Pay attention to the region and U table.
According to the application technique, + 5-10% should be added to the quantity calculation in machine application.
Waste account should be kept separately. It varies according to construction site conditions.
Do not exceed the recommended amount of water. The material should not be used below the minimum temperature allowed for complete setting. Low temperatures may slow setting while high temperatures may accelerate it. The workability time varies depending on the temperature.
The newly applied product must be protected against freezing.
If all conditions are met, Product Quality is guaranteed with IZOROYAL assurance (20 years).